Folder Gluer Machine

Location : Home > Folder Gluer Machine

Product Introduction

QYHX-2400B Type high speed folder gluer machine can be used for pasting and forming of AA, AB, two pieces molding boxes and single piece molding boxes. The model can replace the manual glue box in the actual production, and reduces the labor intensity; compared with the traditional semi-automatic folder gluer machine, this model can save labor. Because of the different working methods, compared with the above two kinds of carton forming process, it can greatly improve the quality of the products.

Video of Machine:



QYHX-2400B Type High Speed Folder Gluer Machine

二、Product Introduction

QYHX-2400B Type high speed folder gluer machine can be used for pasting and forming of AA, AB, two pieces molding boxes and single piece molding boxes. The model can replace the manual glue box in the actual production, and reduces the labor intensity; compared with the traditional semi-automatic folder gluer machine, this model can save labor. Because of the different working methods, compared with the above two kinds of carton forming process, it can greatly improve the quality of the products.

 

三、Main technical features

QYHX-2400B series semi automatic double paste box machine is our company accoeding to the change of market demand at domestic and abroad, a comprehensive analysis of similar products at home and abroad, and on the basis of research on manufacturing and production process in-depth, developed a new "festival," excellent performance "," double paste box machine.

This machine adopts double servo feeding, ensure that the equipment in the stability of high speed paper feeding and high-speed feed synchronization, and servo feed can make A,B piece set feeding size individually , so as to solve the problem of size.

Double gluing is used for gluing, respectively hot melt adhesive and ordinary sealant, which ensures the 100% bonding of the product into the container and cold storage.

The double servo positioning is also used in the two piece butt joint, which provides the same consistency for low speed bonding and high speed bonding of the machine.

This machine can be used as a flat box and a special shaped box, the front positioning of our company's original, the use of dual-use specifications, shorten the time for the machine to change order .

The machine is a dual function machine, both the double box and the single box can be produced. It is only 2 minutes to complete the conversion from double box to single box.

 

四、Machine parameters and configuration list

1Machine parameters

Feeding size: Max 1200*1200  Min 500*450

Applicable paper range: A-E corrugated and less than 6mm corrugated board

Design speed: 0-2200pcs/h

DimensionsL*W*H 6940*4200*1310(Vertical compression)

                    4060*3200*1310(Horizontal pressing)

Heating power:           2KW

Total power           9KW