Corrugated Cardboard Production line

Location : Home > Corrugated Cardboard Production line

1800mm CORRUGATED CARDBOARD PRODUCTION LINE

Design Speed 150m/min

Working Speed 120m/min






TECHNICAL PARAMETER:

Item

Commodity Name

Unit

Amount

1

1800mm - Hydraulic Shaftless Reel Stand

( with 2 feeding track & trolley)

SET

2

2

1800mm - Ø900 Pre-heater

SET

2

3

1800mm - 320CR Fingerless Type Single Facer

(Vacuum absorbable feeding;drive motor with frequency inverter)

SET

1

4

Conveying Bridge

SET

1

5

DWX-150 NC Single-face Corrugating Cutting Machine

(NC Thin Blade Slitter, Spiral Cutting, Down Stacking)

SET

1


1.1800mm - Hydraulic Reel Stand


►Structure and Features:

1,Symmetrical structure,can carry two kraft paper at one time,which can work without brake.

2,Reel paper lift-lower, clamp, loosen, movement, contra position operated by hydraulic.feeding kraft / reel paper quickly.

3,Brake: pneumatic brake


►Spec of stand:

1, Reel Stand driven by hydraulic

2, Kraft paper range:

Width:  Max: 1800mm        Min: 900mm

Diameter: Max: Φ1500mm

Max Weight:3000Kg(One side)

3, Pneumatic Source Pressure(Mpa): 0.4---0.8Mpa

4, Power:380V  50Hz


2.Ø900mm Preheater



1, The preheater roller is under the stander of the 1st class(grade) pressure vessel of the national.

2, All the surfaces of every rollers have been grinded with high accuracy and chromed plated to less the resistance of paper preheating, long service of using life.

3, Electric to enlarge the preheating area, preheating area can be in 360° to adjust the preheating

Area.


►Common Spec:

1, Working Width: 1800mm

2, Diameter of the Preheater cylinder:Φ900mm

Preheating adjusting area by electric: 360°

Diameter of the roller for Preheating adjusting area by electric:Φ110mm

3, Steam temperature: 150-200℃      Steam pressure: 0.8-1.3Mpa

4, Working Power: 380V     50Hz

5, Power:250W     Short Time(S2) Working Type


3.1800mm- Vacuum Absorbable Feeding Single facer


Single facer is the heart of the corrugator which can produce the corrugates board /sheet,also can be use at Single Wall Line with mill roll stand and Reel to Sheet Cutter.


Common Spec:

Working width: 1800mm

Operation Direction: Left or right (decided by the workshop of customer)

Design Speed: 150m/min

Working Speed :120m/min

Temperature: 180—200℃

Air pressure: 0.8—1.3Mpa

Corrugated Flute Type: UV or UVV



4.Conveying Bridge



1, The Main Frame is connected with channel steel, and angle steel.

2, With Protecting Handrail on both sides and safety pedal, the operation side is installed with safety ladder, to make sure the safety and convenience of the worker.

3, PVC feeder belt to transport the single or double face corrugated sheet with corrugated type.

4, Vacuum suction tension control, suction pipe(140mm) with adjusting valve,draw fan power can be adjusted freely.

5, Electric to correct the position of feeding( two sets),correct parts are driven by fast and accuracy to position, steady to move.


►Common Spec:

1,Working Width:1800mm

2, Operation Direction: Left or right(decided by the workshop of customer)


5.DWX-150 Type NC Slitter & NC Cutter & Down Stacker



Specification

1. Keep order 999touch screen and PLC control system

2. Servo system , high quality servo motor drive.

3. Helical cutting knives, Quality gear with high-accuracy grinding, long life knives.

4. Stacker with automatic calculation and side delivery. The max. Stacking length 1400mm.

5 Quickly change orders, change order only 3--8 second.

6. Adopt tungsten slitter knives, long lift of slitter knives.

7 Automatic grinding slitter knives, non-stop grinding.

8. Adopt high quality industrial computer control system.


►Common Spec:

1Max. Width1800mm                   2Operation SideLeft or RightAs Client’s Plant

3Design Speed150m/min                4Working Speed: 120m/min

5ArrangementNC Helical Cutter               6Min. Cutting Length300mm

7Max. Cutting Length9999mm       8Cutting Accuracy±1mmNormal Speed ±1.5mm(Abnormal Speed)   95 groups200 blade


FACTORY MANUFACTURE PROCESS